Skip to content

Carpet Installation Tools

Measure a room for a carpet stretcher

Start with the installation method, then measure the working span and the width of the wall or doorway that will support the stretcher.

Confirm the installation method

The Carpet and Rug Institute distinguishes power stretching across the room from positioning along tack strip with a knee kicker. Use the carpet manufacturer's instructions for the specific head and stretch-in procedure.

Measure both directions that matter

Measure along the span between the carpet head and its opposite support. Then measure across the support itself, including a doorway if relevant. A wide tailblock and a long tube setup solve different problems.

Read the standard and value kit contents

Compare the number and length of supplied tubes and whether the cases can carry them together. The 10-284V includes three more 3 ft extensions than the 10-284. Select a separate head only after checking the host model.

Source documentation

Guide questions

Can I choose by the tailblock width alone?

No. Compare the separate room-span reach.

Is a knee kicker a full-room substitute?

CRI assigns it to local placement in a sequence that also uses a power stretcher.

When does the value kit help?

It adds reach and a tube case when you need the longer setup.

Which accessory suits the job?

The Falcon 10-284 reaches up to 23½ ft. The 10-284V adds three 3 ft tubes for up to 38 ft and supplies the tube case. Both support the wide Falcon tailblock.
ROBERTS Falcon Power 44 10-284 standard carpet stretcher kit ↗ROBERTS Falcon Power 44 10-284V carpet stretcher value kit ↗
The 10-412-2 starts at 17 in for local positioning. The wider Crain 525 starts at 21 in. Compare clearance behind the bumper and contact at the head.
ROBERTS 10-412-2 deluxe adjustable carpet knee kicker ↗Crain 525 wide-head carpet knee kicker ↗

Accessories in this guide

ROBERTS 10-410 adjustable carpet knee kicker ↗

Choose this kicker if you need to move carpet into position at an edge and want more than one working length.

ROBERTS Junior 10-237V lever carpet stretcher value kit ↗

Choose the value kit when the measured span of the room makes its extra extension tubes useful.

Capitol 110900 four-inch professional stair tool ↗

Choose this tucker when you have room for a four-inch head and want to press a wider section at a time.

ROBERTS 10-752 deluxe carpet installation tool kit ↗

Choose this assortment when you need tools for several stages, from positioning the carpet to trimming and seam work.

Better Tools power carpet stretcher with three extension tubes ↗

Choose this lever kit if you want a folding tailblock for storage and the listed head swivel is useful for the room layout.

ROBERTS 10-412-2 deluxe adjustable carpet knee kicker ↗

The 17-inch starting position gives you a shorter option than the 19-inch economy kicker when furniture or a wall limits your working space.

ROBERTS 36-inch steel carpet stretcher extension tube ↗

Choose this extension when you have a compatible ROBERTS system and need more distance between its working head and tail block.

Bon Tool 24-315 three-and-a-half-inch carpet stair tool ↗

Choose the Bon 24-315 when a four-inch tucker is too wide for the working gap you measured.

ROBERTS Junior 10-237 carpet stretcher and 10-410 kicker bundle ↗

Choose this pair when you need a lever stretcher for the room span and a separate adjustable kicker for positioning along an edge.

ROBERTS Falcon Power 44 10-284V carpet stretcher value kit ↗

Choose the value kit when you need the extra tube reach or want to store extensions in their own case.

ROBERTS EZ Tuk 10-522-4 nylon carpet tucker ↗

Choose the EZ Tuk when you want a nylon contact surface near painted trim or tile.

ROBERTS adjustable knee kicker and 10-616-2A wall trimmer bundle ↗

Choose this pair when the job calls for both positioning carpet at an edge and cutting the excess against the wall.

Crain 525 wide-head carpet knee kicker ↗

Choose the wider head when you have open access to the edge and want contact across more of the carpet at once.

ROBERTS Falcon Power 44 10-284 standard carpet stretcher kit ↗

Choose the standard Falcon if the span you measured fits within its supplied tube setup.

MARSHALLTOWN QLT ST35 cushion-grip carpet stair tool ↗

Choose the ST35 if you want the same working width as the steel Bon 24-315 with a cushioned hand grip.

ROBERTS 10-128 compact seam stretcher and adjustable kicker bundle ↗

Choose this pair when the work includes local seam or pattern alignment as well as positioning carpet at an edge.

ROBERTS The General 10-2100 five-inch carpet knee kicker ↗

Choose The General if you need a wider head while keeping the handle relatively short.

EMVANV plastic carpet stair and edge tucker ↗

Choose this molded tucker if you want a light tool for hand pressure around an edge.

ROBERTS 10-410 kicker and Bon 24-315 stair tool bundle ↗

Choose this pair when the job calls for one tool to position the carpet and another to press the edge into a stair crease or gully.

ROBERTS Falcon Power 44 10-284T replacement tailblock ↗

Choose this part when the padded support end of your Falcon needs replacing or you need the wide configuration across a doorway.

PANSHIYON PSY240601 cast-iron carpet stair tucker ↗

Choose this tucker when you have a measured gap and want a steel-like rigid working face with a coated handle.

ROBERTS 10-412-2 deluxe kicker and Bon 24-315 stair tool pair ↗

Choose this pair if there is limited room for the kicker and you also need the steel 3½-inch tucker.

ROBERTS 10-422BK high-profile deluxe carpet knee kicker ↗

Choose this high-neck version when the working area already contains a stretcher head or pole and you want a kicker with room to pass over it.

Coloch 3½-inch cast-iron carpet stair tucker ↗

Choose this tucker when you want a flat face for working a straight portion of a stair crease.

MARSHALLTOWN AKK adjustable professional carpet knee kicker ↗

Choose the AKK if you need local carpet positioning and the 18¾ to 22¾ inch range fits your working clearance.

Bon Tool 24-202 junior power carpet stretcher kit ↗

Choose this kit when its measured span covers your working distance and you want the documented wide aluminum pin plate.

Draper 27943 five-position carpet knee kicker ↗

Choose this Draper kicker if its five-position range fits the space where you need to position the carpet.

ROBERTS Falcon Power 44 10-242 replacement nap grip head ↗

Choose the 10-242 when your Falcon Power 44 needs the additional nap grip head and the carpet calls for that contact style.

Orcon Quik Tuck ORX-6672 rolling carpet edge tucker ↗

Choose this rolling tool for a continuous edge beside a transition, where the discs can follow the line.

Zimpty ZY461 knee kicker, metal tucker and carpet cutter kit ↗

Choose this kit when a small job calls for a kicker, a separate cutter and a metal stair tucker.

Capitol 110300 professional high-profile carpet knee kicker ↗

Choose the 110300 when you need a raised neck but have limited clearance behind the bumper.

Zimpty ZY457 kicker, plastic carpet tucker and knife kit ↗

Choose this kit if you want a plastic tucker for hand pressure beside finished trim and need a kicker and knife as well.

Shop these departments