CARPET INSTALLATION TOOLS

Carpet Installation Tools

Plan a small carpet patch or removal

Identify the exact damage, matching carpet and access to the old edge before choosing a cutter, puller or joining kit.

Check the full size of the damage

A three-inch cutter produces a repeatable circle if the whole area fits within it. For a longer edge or irregular shape, choose a separate knife and lay out a matching donor piece. Check pile direction on both pieces.

Choose how to reach the old material

A pulling clamp grips an exposed carpet edge. A tack lifter works on individual fasteners, and a strip bar lifts the strip below the edge. Select a contact point that suits the material you need to remove.

Check the joining system

Compare the backing, the specified joining method and any tape the kit supplies. A roller presses the finished join. It does not cut a donor patch. Compare a kit with a separate cutting tool if you need both steps.

Source documentation

Guide questions

Does a circular kit come with a donor piece?

Provide matching carpet yourself.

Can I choose a kit by tape length alone?

Check backing compatibility, roller contact and whether you need a cutter.

What should I use for old tack strip?

Choose a documented lifting tool rather than a carpet-edge clamp.

Which accessory suits the job?

  1. The Crain and Orcon cutters both specify a three-inch circle. The Orcon offer names six pressure discs, while the Crain document identifies a cutter and storage cap.

    Crain 174 three-inch circular carpet repair cutter ↗Orcon 13067 three-inch carpet patch kit with pressure discs ↗

  2. The ROBERTS puller grips an exposed carpet edge. The Mantis bar reaches under tack strip and pivots to lift it. Choose the part you need to remove.

    ROBERTS 10-10 serrated carpet puller ↗Mantis model 1 long-handle carpet tack-strip pry bar ↗

Accessories in this guide

Shop these departments